# Things, I was hoping to see in the new V4

**URL:** <https://community.advfirmwares.com/t/things-i-was-hoping-to-see-in-the-new-v4/96>\
**Category:** Uncategorized\
**Created:** [June 13, 2019, 7:13pm UTC](https://community.advfirmwares.com/t/things-i-was-hoping-to-see-in-the-new-v4/96 "2019-06-13T19:13:21Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wallace3D](https://community.advfirmwares.com/letter_avatar_proxy/v4/letter/w/5daacb/32.png) [@Wallace3D](https://community.advfirmwares.com/u/Wallace3D)\
**Post date:** [June 13, 2019, 7:13pm UTC](https://community.advfirmwares.com/t/things-i-was-hoping-to-see-in-the-new-v4/96/1 "2019-06-13T19:13:21Z")

</div>

- Flow control during print in print settings as in every other printer I own
- Implemented linear advance tuning out of the tuning menu

---

<div class="post-metadata">

**Author:** ![andrivet](https://community.advfirmwares.com/user_avatar/community.advfirmwares.com/andrivet/32/993_2.png) [@andrivet](https://community.advfirmwares.com/u/andrivet)\
**Post date:** [June 13, 2019, 7:30pm UTC](https://community.advfirmwares.com/t/things-i-was-hoping-to-see-in-the-new-v4/96/2 "2019-06-13T19:30:19Z")

</div>

There is flow control, or i misunderstood something?

 ![PrintSettings](https://community.advfirmwares.com/uploads/default/original/1X/ec4d11fe6590b66793d3552c03fed8be63a817e6.png)

---

<div class="post-metadata">

**Author:** ![Wallace3D](https://community.advfirmwares.com/letter_avatar_proxy/v4/letter/w/5daacb/32.png) [@Wallace3D](https://community.advfirmwares.com/u/Wallace3D)\
**Post date:** [June 14, 2019, 9:07am UTC](https://community.advfirmwares.com/t/things-i-was-hoping-to-see-in-the-new-v4/96/3 "2019-06-14T09:07:38Z")

</div>

@andrivet I mean by that a live adjustmend of the extrusion multiplier…  
and additionnaly would be nice to have the possibillity, to set the k-factor of lin adv in more increments. 0.11 for example instead of just 10 percent steps…  
Another question: did you change the home offsets? my feeling is, that the printer starts more to the right and more to behind than before…  
Thanks again

---

<div class="post-metadata">

**Author:** ![Wallace3D](https://community.advfirmwares.com/letter_avatar_proxy/v4/letter/w/5daacb/32.png) [@Wallace3D](https://community.advfirmwares.com/u/Wallace3D)\
**Post date:** [June 14, 2019, 9:25am UTC](https://community.advfirmwares.com/t/things-i-was-hoping-to-see-in-the-new-v4/96/4 "2019-06-14T09:25:34Z")

</div>

edit: ok - M206 says no offsets are set… so it’s just the homing position that cheated on me I think 😉

---

<div class="post-metadata">

**Author:** ![andrivet](https://community.advfirmwares.com/user_avatar/community.advfirmwares.com/andrivet/32/993_2.png) [@andrivet](https://community.advfirmwares.com/u/andrivet)\
**Post date:** [June 14, 2019, 9:35am UTC](https://community.advfirmwares.com/t/things-i-was-hoping-to-see-in-the-new-v4/96/5 "2019-06-14T09:35:23Z")

</div>

Please, do not mix different, unrelated, questions in the same topic. One subject, one topic.

So for your second question, it may be related to safe homing. I will change that in version 4.0.1 (for those without a sensor).

---

<div class="post-metadata">

**Author:** ![Wallace3D](https://community.advfirmwares.com/letter_avatar_proxy/v4/letter/w/5daacb/32.png) [@Wallace3D](https://community.advfirmwares.com/u/Wallace3D)\
**Post date:** [June 14, 2019, 10:20am UTC](https://community.advfirmwares.com/t/things-i-was-hoping-to-see-in-the-new-v4/96/6 "2019-06-14T10:20:10Z")

</div>

sorry… so here the new list fitting the topic:

- Extrusion multiplier andjustment during print in print settings (as in every other printer I own)  
(- Implemented linear advance tuning out of the tuning menu… → would maybe use to much space)
- Possibillity to set 1% steps of K-Faktor instead of just 10% steps (for example 0.15 instead of just 0.1 or 0.2)