# ADVi3++ 6.0.0 Beta 2 is released

**URL:** <https://community.advfirmwares.com/t/advi3-6-0-0-beta-2-is-released/5893>\
**Category:** General\
**Created:** [May 14, 2025, 11:14am UTC](https://community.advfirmwares.com/t/advi3-6-0-0-beta-2-is-released/5893 "2025-05-14T11:14:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![andrivet](https://community.advfirmwares.com/user_avatar/community.advfirmwares.com/andrivet/32/993_2.png) [@andrivet](https://community.advfirmwares.com/u/andrivet)\
**Post date:** [May 14, 2025, 11:14am UTC](https://community.advfirmwares.com/t/advi3-6-0-0-beta-2-is-released/5893/1 "2025-05-14T11:14:16Z")

</div>

A preliminary (i.e Beta 2) version of ADVi3++ 6.0.0 has beed released.

> IMPORTANT: Please do **not** install this Beta 2 if you expect a fully stable version. It is not a stable release: severe bugs may occur, and they might be bad enough that they make a manual downgrade to an earlier version necessary. You should feel comfortable with and capable of possibly having to do this _before_ installing a preliminary release.

This new version is the result of months of work and provides many new features such as:

- Support of native power loss detection and print recovery for Wanhao i3 Plus Mark II printers.
- Support of native power control (power off) for Aldi Balco 3D Touchscreen printers.
- Support of [Bigtreetech Relay 1.2](https://biqu.equipment/products/bigtreetech-reply-v1-2-automatic-shutdown-module-after-printing) to add power loss and power control features to other printers.
- Redesigned screens with more live information such as the X, Y, Z position of the extruder.
- More precise temperature values for the hotend and the bed.
- Mesh Leveling without a sensor.

# Differences with Beta 1

Thanks to @Philipp and @MauroGil for their tests and bugs reports.

- There was a bug in the Sensor screen when X and Y offsets were saved. This is now fixed.
- The PID tuning for the Bed is back. I removed it in Beta 1 to save some SRAM and because I thought it was not used much. I was wrong. So I put it back.
- Load & Unload do not home anymore. The head is raised only if its position is known and is too low (under 20 mm).
- Labels in the Def. Acceleration screen were wrong.

# Binaries

- As usual, supporters of the project on Patreon can find the pre-built binaries in [ADVi3++ Binaries](https://community.advfirmwares.com/c/pre-build-binaries/).

# User Manual

- [The User Manual](https://manual6.advi3pp.com/) is mostly up to date but I will provide more information regarding some topics.

# Source code

Complete and up to date sources are published on [GitHub](https://github.com/andrivet/ADVi3pp):

- [advi3++dev](https://github.com/andrivet/ADVi3pp/tree/advi3++dev) branch for the latest developments (i.e version 6.0.0).
- [advi3++](https://github.com/andrivet/ADVi3pp) branch for the latest stable release (i.e. version 5.8.0).
- All releases have also [an associated tag](https://github.com/andrivet/ADVi3pp/tags)

# Support

For support requests, please ask your question on [ADVi3++ Community - Get Help](https://community.advfirmwares.com/c/get-help/). I reply to support requests only there. You can also use the [search feature](https://community.advfirmwares.com/search?expanded=true) in order to look for past similar issues.

# Reporting of Issues or request a new feature

This can be done either on [ADVi3++ Community - Get Help](https://community.advfirmwares.com/c/get-help/) or on [GitHub](https://github.com/andrivet/ADVi3pp/issues).